Given its environmental toxicity, ammonia is removed during wastewater purification and then used for fertilizers or fuel. However, this process is very energy and chemical intensive. Now, researchers have shown that the application of an external electric field can greatly enhance the efficiency of ammonia removal from wastewater, making it more energy- and cost-effective.
Ammonia is one of many pollutants present in wastewater and can be toxic for marine and terrestrial life. Therefore, in a process called air stripping, it is removed from wastewater and later used as a fertilizer or fuel. Air stripping converts ammonia into a gas, that can then escape the wastewater from its surface. But this process is not efficient: it is energy-intensive, and requires specific temperatures, air supply, and a lot of chemicals, making it expensive.
Addressing these drawbacks, in a study published in Water Research (made available online on August 5, 2021 and published in Volume 203 of the journal on September 15, 2021), researchers from South Korea have demonstrated that the simple application of an electric field during air stripping can substantially improve the efficiency of ammonia removal, even under sub-optimal conditions. “So far, the removal of ammonia from wastewater was thought to be dependent on only pH, temperature, and air supply. However, we have shown that an electrical field can also act as a modulator of this process,” says Prof. Young-Chae Song, the lead investigator on this study.
Researchers from South Korea have demonstrated that the simple application of an electric field during air stripping can substantially improve the efficiency of ammonia removal
Prof. Song and his team used a combination of live experiments with an ammonia stripping tank and deep learning to understand how electric fields of different strengths influence the efficiency of ammonia removal from wastewater. They found that electric fields with an alternating current of 50 MHz and a power of 15 V/cm significantly improves the ammonia removal efficiency, increasing it from 51% to 94%, even under sub-optimal conditions. Therefore, improved ammonia yields could be achieved while considerably reducing the consumption of energy and chemicals.
Prof. Song comments, “Our simulations showed that electric field application provides a similar efficiency of ammonia removal to conventional methods at a much lower temperature, air supply, and pH. Moreover, the energy needed to power the electric field is a minute fraction of the energy required to achieve these ‘optimal’ conditions.”
Indeed, this new electric field-coupled platform could provide a more economical way of stripping ammonia from wastewater and reducing the carbon footprint associated with this process.
