Smart Water Magazine
Connecting Waterpeople

You are here

Barhale confirms Thames Water Raw Water works

  • Barhale confirms Thames Water Raw Water works
    Large diameter Gate Valves (GV) and Butterfly Valves (BV) will be replaced under Thames Water’s Raw Water Tunnel Inspection & Refurbishment programme similar to this 1800mm BV seen being installed on Shaft 7 of the Southern Leg Tunnel, Queen Mother and Wraysbury Outlet Tunnel

About the entity

Barhale (a subsidiary of Barhale Holdings plc) is one of the largest civil engineering and infrastructure specialists with 40 years’ experience working UK-wide across the water, transport, built environment and energy sectors.


Barhale has secured a £9 million package of schemes under Thames Water’s Raw Water Tunnel Inspection & Refurbishment programme.

The civil engineering and infrastructure specialist will inspect 35km of raw water tunnels across West and North London. The Barhale teams will remove debris, silt and invasive species, such as Zebra Mussels, which form substantial concentrations across the network. It is anticipated that in the most affected tunnels as much as 140m3 of mussels will be removed. Once cleared, the tunnels will be inspected and any structural repairs will then be carried out.

As a further part of the allocation, Barhale will also carry out inspections and replacement/refurbishment of the very large (up to 2.4m diameter) internal valves at sites including: Moor Lane shaft (gate and butterfly valves); Ashford Common shaft (gate and butterfly valves); Queen Mary Outlet – Hampton Leg (gate valves); Wraysbury Shaft (butterfly valve); and Queen Mother (penstock). Two gate valves at the King George VI Reservoir will also be refurbished.

The work which comprises a total of 12 schemes is being delivered under the AMP7 Lot 5 Framework. Barhale will work closely with Thames Water to manage the isolation programme.

Barhale Director Phil Cull sees the programme as a key element in the maintenance and upgrade of the South East’s water supply.

“This is a hugely important part of London’s water infrastructure and we are delighted to get the go ahead from Thames Water,” he said. “We have built a huge amount of expertise and experience on the Thames Water network and to be selected on this project is great vote of confidence in our team’s capabilities.

“While maintaining good flows through the raw water tunnels is essential, it is also of paramount importance that works are delivered efficiently and on time to ensure that there is no unnecessary pressure on the system.

“We have been working closely with the Thames Water team to optimise isolations and are bringing a great deal of new thinking developed through the maintenance of the Thames Water Ring Main to the Raw Water programme. We will again be collaborating to minimise the length of isolations and to maximise what is achieved during each one.”

Barhale Regional Manager John Prendergast adds, “This award builds on the successful delivery of the first three years of the Thames Water AMP7 Tunnels and Aqueducts programme in which Barhale has already completed monitoring and maintenance on almost half of the length of the Thames Water Ring Main tunnels and a further 9km of raw water tunnels.”

Work is expected to complete in 2025.

Subscribe to our newsletter

Topics of interest

The data provided will be treated by iAgua Conocimiento, SL for the purpose of sending emails with updated information and occasionally on products and / or services of interest. For this we need you to check the following box to grant your consent. Remember that at any time you can exercise your rights of access, rectification and elimination of this data. You can consult all the additional and detailed information about Data Protection.